Tuning; Automatic Search - Haier L26A9-AK Owner's Manual

Tuning

There are three ways of searching:automatic search,manual search and MFT
manual fine tune)
You may operate it either on the TV or on the remote control.Here is mainly
about the remote control

Automatic search

CH+
VOL- MENU VOL+
CH-
CH+
VOL- MENU VOL+
CH-
Automatic search
1、Press MENU button and
VOL+/- to select Tuner menu，
Then press CH+/- to enter
2、Press CH+/- button to
move to Auto Search item。
3、Press VOL+,then Auto Search
will work。The TV set will search
automatically all available
programs, after that, all available
program will be stored in turn
and the TV set will return to the
first channel
If you want to stop the search, just press MENU button
The order of the automatic search is due to the frequency of the
program, generally speaking, it is used only at the first time you
search the program, and once the order of the program has been
confirmed, you don't have to use this function, otherwise the
order of the program will be changed.
After searching
Press CH+/- button to check the channels.
If the color or sound is abnormal in a certain channel, it
may be the color or sound system has not been set properly,
so you should adjust it to the proper system (Reference to
page 9).
１１
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
A
B
C
Picture Audio Tuner Func
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
A
B
C
Picture Audio Tuner Func
Auto Search
ＣＨ ９
Freq. 308MHz
0
PAL
DK
Off
-----
＞＞＞
＞＞＞
＞＞＞
PC Time
0
PAL
DK
Off
-----
＞＞＞
＞＞＞
＞＞＞
PC Time