Tuning; Automatic Search - Haier 21F3A Owner's Manual

Tuning

There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.

Automatic search

CH+
VOL- MENU VOL+
CH-
CH+
VOL- VOL+
MENU
CH-
Automatic search
1. Press MENU button repeatedly to select the TUNING
menu ,and the function menu will displayed in the following
sequence:
PICTURE SOUND
2. Press CH+/- button to move
the indicator to AUTO MEMORY .
3. Press VOL+ button, then
AUTO MEMORY mode will
work.The TV set will search
automatically all available
programs, after that, all
available programs will be
stored in turn and the TV set
will return to the first channel.
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
After searching
Press CH+/- button to check the channels.
If the colour or sound is abnormal in a certain channel, it
may be the colour or sound system has not been set properly,
so you should adjust it to the proper system (Reference to
page 7).
TIMER TUNING
TUNING
POSITION
BAND
SKIP
SEARCH
MFT
AUTO MEMORY
ASM
STOP
FUNCTION
1
VH
OFF
UP
DOWN
V H 0