Power Supply; Tuning Procedure - Haier 21F6D Owner's Manual

Power supply (switch on/off to set main power supply).
1.Press power switch button to switch on AC power supply. The red power
indicator will light.
2. Press the power switch button on the remote controller to enter normal
receiving condition when the TV set is in standby condition.
There are Auto-search, Semi-Auto search and
Fine tuning method.
Auto-search
1.Press [MENU] button to let TUNING menu display
on the screen, then press [-CH+] buttons to select
AUTO MEMORY .
2. Press [VOL+] button to make the AUTO
MEMORY mode work, the TV set will begin to
search programs from program number 0.
After the search is finished, program number
0 will display on the screen.
Note: During auto-search, if you want to stop
searching, press [VOL-] button.

POWER SUPPLY

TUNING PROCEDURE

7
TUNING
POSITION 01
BAND V L
SKIP OFF
SEARCH DOWN
MFT UP
AUTO MEMORY
49.87 MHZ
SELECT
ADJUST
ASM VL
49.87 MHZ
STOP
0