System Fan; Removing The System Fan - Dell OptiPlex 3090 Ultra Service Manual

Steps
1. Align the notch on the eMMC storage module with the connector on the system board and slide the eMMC storage module
at an angle into the slot.
2. Replace the (M2x3.5) screw to secure the eMMC storage module to the system board.
Next steps
1. Install the cover.
2. Install the device on Fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
mount.
3. Follow the procedure in

System fan

Removing the system fan

Prerequisites
1. Follow the procedure in
2. Remove the device from
mount.
3. Remove the cover.
About this task
The figure indicates the location of the system fan and provides a visual representation of the removal procedure.
108 Removing and installing components
after working on your device.
before working inside your
fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
device.