Dell OptiPlex 3090 Ultra Service Manual page 127

Table 7. System setup options—Storage menu (continued)
Storage
Device
M.2 PCIe SSD
Type
Device
PCIe M.2 eMMC
Type
Device
Table 8. System setup options—Display menu
Display
Primary Display
Video Primary Display
Full Screen Logo
Table 9. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
HTTPs Boot Feature
HTTPs Boot
Table 10. System setup options—Power menu
Power
USB Wake Support
Enable USB Wake Support
Displays the SATA device information of the system.
Displays the M.2 PCIe SSD type information of the system.
Displays the M.2 PCIe SSD device information of the system.
Displays the PCIe M.2 eMMC type information of the system.
Displays the PCIe M.2 eMMC device information of the system.
This field determines which video controller will become the primary display
when multiple controllers are available in the system.
By default, Auto option is enabled.
Enable or disable full screen logo.
By default, the option is not enabled.
If enabled, UEFI networking protocols are installed and available, allowing pre-
OS and early OS networking features to use any enabled NIC's. This may be
used without PXE turned on.
By default, Enabled with PXE option is enabled.
Enable or disable the internal WLAN device
By default, the option enabled.
Enable or disable the internal Bluetooth device
By default, the option enabled.
Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.
Enable or disable the HTTPs Boot feature.
By default, the HTTPs Boot option is enabled.
When enabled, connecting Dell USB devices will wake the system from
standby.
By default, the option is enabled.
System setup 127