Emmc Storage Module; Removing The Emmc Storage Module; Installing The Emmc Storage Module - Dell OptiPlex 3090 Ultra Service Manual

eMMC Storage module

For computers with eMMC module in M.2 2230 SSD slot.

Removing the eMMC storage module

Prerequisites
1. Follow the procedure in before working inside your device.
2. Remove the device from fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
mount.
3. Remove the cover.
About this task
The figure indicates the location of the eMMC storage module and provides a visual representation of the removal procedure.
Steps
1. Remove the (M2x3.5) screw that secures the eMMC storage module to the connector on the system board.
2. Lift and slide the eMMC storage module at an angle out from the slot.

Installing the eMMC storage module

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the eMMC storage module and provides a visual representation of the installation procedure.
Removing and installing components 107