Esa Translation Data; Supported Subscriber Line Types - Nortel DMS-100 Series Maintenance Manual

3-18 ESA maintenance overview
entered as Digitone. When the system frees the receiver, DTR use is
maximized.
ESA CC supervision sender
The ESA CC uses a streamlined set of execs to handle call processing. The
system loads the definition of execs in the ESA exec lineup at the exec
download time of the RTS sequence. The supervision sender uses the execs
to create work requests for the server.

ESA translation data

When the RLCM is in ESA mode, the ESA CC uses part of the translation
data from the DMS CC to perform translations. The DMS CC downloads
this part of the DMS CC data, required for ESA call processing, to the ESA
CC. This type of translation data is static data. The system generates ESA
logs when the downloaded data exceeds the RLCM ESA maximum. Refer
to Translations Guide for additional information about ESA translations.
The ESA CC requires two types of static data:
The user downloads the general static data when the ESA CC is ManB. The
system can download the general static data when the ESA CC returns to
service. The system loads ESA static translations data when the ESA CC is
in service (InSv).
Downloading the ESA processor
Translation data is downloaded to the ESA processor as follows:

Supported subscriber line types

During RLCM ESA mode, the supported subscriber line types are POTS and
MDC.
297–8351–550 Standard 04.01 August 1999
general XPM-type
ESA translations
manually: The LOADPM command downloads data to the ESA
processor.
during return to service (RTS): The RTS command downloads data to
the ESA processor if the processor cannot perform call processing with
current data.
automatically: The data are loaded during daily updates of the ESA
processor as specified in the RLCM_ESADUPD_HOUR office
parameter.