Table of Contents
Advertisement
for your own safety read instruction manual
before operating this equipment
the purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. this manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. the
progression of symbols is described below. remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
NOTICE
safety instructions for pneumatic tools
1.
Keep all safety devices in
place and in working order.
2.
remove adJusting Keys and
Wrenches. Form habit of check-
ing to see that keys and adjusting
wrenches are removed from tool
before operation.
3.
Keep
WorK
Cluttered areas and benches invite
accidents.
4.
do not use in dangerous
environment. do not use
pneumatic tools in damp or wet
locations, or where any flammable
or noxious fumes may exist. Keep
work area well lighted.
safety
indicates an imminently hazardous situation which, if
not avoided, Will result in death or serious injury.
indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
it may also be used to alert against unsafe practices.
this symbol is used to alert the user to useful infor-
mation about proper operation of the equipment.
area
clean.
5.
Keep children and visitors
aWay. all children and visitors
should be kept at a safe distance
from work area.
6.
maKe WorKshop child proof
with padlocks, master switches, or
by removing air hoses from tools.
7.
do not force tool. it will do
the job better and safer at the rate
for which it was designed.
8.
use the right tool. do not
force tool or attachment to do a job
for which it was not designed.
9.
do
not
influence
alcohol.
use
under
of
drugs
the
or
Advertisement
Table of Contents
