Goodman CPC CONVERCIAL SS-CPC90-150 User Manual page 24

p s
RoduCt pECifiCations
u C
nit lEaRanCEs
Maintain an adequate clearance around the unit for safety, service, maintenance,
and proper unit operation. Leave a total clearance of 75" on the main control panel
side of the unit for possible removal of fan shaft, coil, electric heat, and
gas furnace. Leave a clearance of 48" on all other sides of the unit for possible
compressor removal or service access, and to ensure proper ventilation
and condenser airflow. Do not install the unit beneath any obstruct-
ion. Install the unit away from all building exhausts to inhibit
ingestion of exhaust air into the unit's fresh-air intake.
E E l
lECtRiCal ntRanCE oCations
11⅝"
10 / "
3
16
3"
24
48"
Dimples Mark Drill Locations
High-Voltage Entrance
Low-Voltage Entrance
www.goodmanmfg.com
36" Min.
75"
48"
48"
SS-CPC90-150