Generac Power Systems 10 kW LP Repair Manual page 55

AC GENERATORS
CRIMP ON STANDARD FEMALE BLADE CONNECTORS
12 AWG
WIRES 2 & 6 TO
DPE WINDING
CAPICITOR REMAINS CONNECTED
TO GENERATOR
Danger: The capacitor may need to be dis-

charged before testing. A capacitor can be
discharged by crossing the terminals with a
metal insulated screw driver.
 Danger: Use proper protective equipment
when dealing with a capacitor that has
exploded.
Part 2
MOMENTARY PUSHBUTTON ON/OFF SWITCH
SINGLE POLE SWITCH ON LIVE SIDE

DO NOT SUBSTITUTE ANY OTHER DEVICE
Figure 17. Construction of Energizing Cord
CAPACITOR
Figure 18. Energizing Cord Connection
4 ft.
DEPRESS SWITCH FOR
ONE SECOND
GENERATOR
sEctioN 2.4
DiaGNostic tEsts
12 AWG
STANDARD MALE PLUG
PLUG ENERGIZING CORD
INTO AC OUTLET
Page 53