Sending A Fax By Automatic Dialing - Sharp UX-CL 220 Operation Manual

Sending a Fax by Automatic Dialing

5
When you hear the fax tone, press
used it.
When transmission is completed, the fax will beep once.
Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears
in the display, remove the document as explained on page 123. (This may
occur if the other fax machine doesn't respond properly when you attempt to
send the document.)
Sending a Fax by Automatic Dialing
You can store your most frequently dialed fax or phone numbers in the
machine for automatic dialing.
Auto-dial numbers can be stored using either the fax machine or the
cordless handset (to store a number using the cordless handset, see page
63).
The cordless handset and fax machine share the same auto-dial numbers.
A total of 30 numbers can be stored.
Storing fax and phone numbers for automatic dialing
1
FUNCTION
Press
2
Press
3
Enter the fax or voice number by pressing the number keys.
(Note: A space cannot be entered.)
To clear a mistake, press
If a pause is required between any of the digits to access a special service
or an outside line, press
seconds per pause). Several pauses can be entered in a row.
78
once and once.
once.
SPEAKER
FUNCTION
START/MEMORY
. Replace the handset if you
Display:
.
. The pause appears as a hyphen (two
<NEW NUMBER>
ENTER FAX #