Razor POWER CORE E90 Replacement Procedures page 2

Step 3
Disconnect all three (3) wires on the back of the power
switch. Remember the position of the wires, black wire
from charger port connects to gold colored prong, blue
wire connects to middle prong and red wire connects to
side silver prong.
Step 5
Reverse the steps.
ATTENTION: Charge battery 12 hours before using.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Step 4
Using a flat screwdriver, remove the glue on the back
of the power switch and push the switch out from the
battery cover.
2