Usb Interface Troubleshooting - Garmin StreetPilot 7200 Owner's Manual

USB Interface Troubleshooting

Problem/Question
How do I know my
StreetPilot is in USB Mass
Storage Mode?
My computer never
senses that the StreetPilot
is connected.
I cannot find any drives
named "GARMIN" in my
list of drives.
A message saying
"Unsafe Removal of
Device" appears when I
unplug the USB cable.
StreetPilot 7200/7500 Owner's Manual
When your StreetPilot is in USB Mass Storage Mode, a picture of a StreetPilot
connected to a computer is shown. Also, your computer should show a new
Removable Disk drive listed in My Computer.
1. Unplug the USB cable from your computer.
2. Load the USB Drivers to your computer. See
3. Plug the USB cable into your computer. Select
Try the solution listed above.
If you have several network drives mapped on your computer, Windows may have
trouble assigning drive letters to your StreetPilot drives. Follow the steps on the
next page to assign your drive letters.
When you are ready to disconnect your StreetPilot from your computer, double-
click the Unplug or Eject
Device" and click Stop. Select the StreetPilot drives and click OK. You can
disconnect your StreetPilot from your computer now.
Solution/Answer
page
USB Mass
icon in your system tray. Select "USB Mass Storage
A
20.
Storage.
PPENDIX
55