Installing The Streetpilot In Your Vehicle - Garmin StreetPilot 7200 Owner's Manual

A
PPENDIX
Installing the StreetPilot in Your
Vehicle
To attach the mounting plate to your dashboard:
1. Clean the area where you want to place the
mount with rubbing alcohol. Dry with a clean dry
cloth.
2. Remove the liner from the bottom of the
mounting plate.
3. Place the mounting plate in the selected location.
4. Bend the edges of the mounting plate to fit the
surface.
Mounting Base on
Mounting Plate
48
To attach the mounting cradle to the StreetPilot:
1. Place the two tabs on the cradle into the two
grooves on the top of the StreetPilot. (A)
2. Swing the cradle forward so that the StreetPilot is
fully seated in the cradle. (B)
3. Slide the cradle's locking lever to the right
(locked).
A
Attaching the Cradle to the StreetPilot
B
StreetPilot 7200/7500 Owner's Manual