Traffic Information; Connecting The Traffic Module To Your Streetpilot; Viewing Traffic Events - Garmin StreetPilot 7200 Owner's Manual

Using an FM Traffic Receiver or an XM Smart Antenna,
your StreetPilot 7200/7500 can receive and use traffic
information. When a traffic message is received, your
StreetPilot displays the event on the map and can change
your route to avoid the traffic incident.
For more information about the FM Traffic Receiver
or XM Smart Antenna, visit the Garmin Web site
(www.garmin.com). For participating FM subscription
providers and covered cities, refer to
com/fmtraffic. For coverage cities for XM NavTraffic,
see http://www.xmnavtraffic.com
Note: This section uses "Traffic Module" to describe the
external device that receives traffic information. The FM
Traffic Receiver (such as the GTM 10) or the XM Smart
Antenna (such as the GXM 30) can be used.
StreetPilot 7200/7500 Owner's Manual
T I
RAFFIC NFORMATION
Connecting the Traffic Module to
Your StreetPilot
Plug the cable from the Traffic Module into the USB
connector on the right side of the StreetPilot.
Viewing Traffic Events
From the Menu page, touch
item in the Traffic Events list to view the details. Touch
http://www.garmin. Near...
to view traffic at a different location.
Traffic Symbol
Color
code
Traffic Events List
T I
RAFFIC NFORMATION
Tools > Traffic. Select an
Traffic
source
(FM
XM) and
signal
strength
or
35