Color And Brilliance Sets; Choosing Color And Brilliance Set; Presetting Color And Brilliance Set - Furuno FAR-28x7 Series Operator's Manual

1. RADAR OPERATION
1.49

Color and Brilliance Sets

This radar provides four sets of color and brilliance sets to match any ambient
lighting condition. The default colors are as shown in the table below. The default
brilliance setting for any item is "50%".
Echo
Inside Display,
Outside Display
Menu
Characters
Bearing Scale
1.49.1

Choosing color and brilliance set

1. Roll the trackball to choose the BRILL box at the left side of the screen.
2. Roll the wheel to choose color and brilliance set from among BRILL1 –
BRILL4.
3. Push the wheel to finish.
1.49.2

Presetting color and brilliance set

1. Roll the trackball to choose the BRILL box at the left side of the screen.
2. Push the right button to open the BRILL menu.
[BRILL1 MENU (1/2)]
1 ECHO COLOR
YEL/GRN/
WHT/COLOR*
2 BKGD COLOR
BLK-GRN/
BLK-RED/
BLU-CIR/
BLU/BRT-BLU
3 PANEL DIMMER
4 CHARACTER
5 CURSOR
6 ECHO
7 TRAIL
8 HL
9 RING
0 NEXT
3. Roll the wheel to choose 1 ECHO COLOR and then push the wheel or the
left button.
4. Roll the wheel to choose echo color desired and then push the wheel or the
left button. "COLOR," available on the A, B, C and W types, displays echoes
in colors of red, yellow and green, corresponding to signal levels of strong,
medium and weak.
1-90
BRILL1
Yellow Yellow
Black, Black Black, Black
Yellow Yellow
Green Red
Blue Red
BRILL2 BRILL3
Yellow
Blue, Black
Yellow
Green
White
* Not available on IMO or A type
BRILL menu
BRILL4
Yellow
Blue, Blue
Yellow
White
Green