Ais Operation; Turning Ais Feature On/Off - Furuno NAVNET 1824C Operator's Manual

5. AIS OPERATION

Connected to an AIS Interface, your NavNet unit can show the name, position and other
nav data of AIS transponder equipped ships.
5.1

Turning AIS Feature On/Off

1. Press the MENU key to display the main menu.
2. Press the SYSTEM CONFIGURATION soft key.
3. Press the GENERAL SETUP soft key.
4. Press the AIS OPTION soft key to show the AIS OPTION menu. (The AIS OPTION soft
key is shown in grey unless the AIS Interface Unit or FURUNO FA-150 AIS Transponder
is connected.)
5. Choose AIS DISPLAY MODE and press the EDIT soft key.
KEY BEEP
LANGUAGE
RANGE UNIT
TEMPERATURE UNIT
DEPTH UNIT
WIND UNIT
WIND DATA
SPEED AVERAGING
LOCAL TIME OFFSET
RESET TRIP LOG
TIME OUT DISP. SETTING
SAVE MOB KEY FUNCTION SAVE SHIP
START UP PICTURE
GENERAL SETUP menu, page 1
AIS DISPLAY MODE
THE NUMBER OF AIS TARGET 100
PROXIMITY ALARM
CPA
TCPA
VECTOR TIME
VECTOR MODE
HISTORY INTERVAL
AIS OPTION menu
GENERAL
ON
SETUP1
ENGLISH
nm, kt
EDIT
°F
ft
DST
ft
ON/OFF
APPARENT
AIS
60 seconds
OPTION
9H 0m
NO
NEXT
PAGE
15 seconds
RETURN
DEFAULT
AIS
OFF
OPTION
OFF
EDIT
OFF
OFF
30 minutes
TRUE
30 seconds
RETURN
5-1