Inserting Waypoints - Furuno NAVNET 1824C Operator's Manual

9. Enter the route name of the second route as you did for the first route.
10. Press the SAVE soft key.
11. Press the MENU key to close the menu.
Note: The maximum number of waypoints in a route is 35. If this number is exceeded an
error message appears. In this case, delete waypoints in one or both routes so the total
number of waypoints does not exceed 35.

3.9.3 Inserting waypoints

Waypoints can be inserted in a route as follows:
Inserting a waypoint from the route list
1. Press the MENU key to open the menu.
2. Press the WAYPOINTS/ROUTES soft key.
3. Press the ROUTES soft key.
4. Use the Trackball to select a route.
5. Press the EDIT ROUTE soft key. The route name screen appears.
6. Press the LOCAL LIST soft key.
7. Use the Trackball to place the cursor at the location
where you want to insert a waypoint.
8. Press the INSERT WPT or CHANGE WPT soft key as
appropriate. The local waypoint list appears.
9. Use the Trackball to select the waypoint you want to
insert. (You can switch between the local list and
alphanumeric list by using the LOCAL LIST and ALPHA
LIST soft keys.)
10. Press the SELECT WPT or CHANGE WPT soft key,
whichever is displayed.
11. Press the MENU key to close the menu.
001
ROUTE NAME:
COMMENT:
48 18.290'N
01
123 14.286'W
007WPT
02 48 17.341'N
123 10.232'W
005WPT
48 20.261'N
03
123 11.658'W
003WPT
04 48 19.862'N
123 04.190'W
006WPT
Edit route menu
3. PLOTTER OPERATION
EDIT
ROUTE
LEG
INSERT
WPT
90.0
2.86nm
REMOVE
WPT
322.6
3.08nm
CHANGE
WPT
75.2
4.99nm
COORD
TYPE
152.5
19.87nm
RETURN
Waypoint list for editing a
LOCAL LIST
001WPT
001
34 44.111'N
135 21.134'W
002WPT
002
34 43.432'N
135 41.456'W
003WPT
003
34 14.124'N
135 21.567'W
004WPT
004
34 34.490'N
135 51.387'W
route (local list)
3-37