Adjusting Hue, Panel Illumination - Furuno 1824C-BB Operator's Manual

1.4

Adjusting Hue, Panel Illumination

You may choose the colors for the radar plotter, and overlay displays, and adjust panel
brilliance.
1. Press the POWER/TX key momentarily. A set of soft keys for adjustment of brilliance
and hue appear.
3nm
12/
LP
H-UP
Radar Display
2. Press the C: HUE soft key to show the hue setting window.
3. Operate the Trackball to select hue desired, referring to the table below. MANUAL SET
follows the color settings on the CHART DETAILS menu for the plotter and the RADAR
DISPLAY SETUP menu for the radar.
Characters
Radar ring
Radar echo
Background
Landmass (plotter) Orange*
* = Beige and light-beige on C-MAP display unit.
Note: When using the overlay screen, the own ship track will be hidden if the radar
background and own ship track are blue and the "MANUAL SET" hue setting is used. In this
case, set HUE to other position and then return to "MANUAL" to show the own ship track in
black.
319. 9 °
BRILL
M
CONTST
PANEL
B
BRILL
HUE
C
RADAR
D
STBY
RETURN
E
359.9 ˚R
+
11.70
nm
(Blank label of softkey is not used)
Brilliance adjustment soft keys
HUE
▲
DAY
NIGHT
TWILIGHT
MANUAL SET
▼
Hue window
Night
Red
Red
Orange
Black
1. OPERATIONAL OVERVIEW
34° 22. 3456'N
080° 22. 3456'E
16.0nm
WP-002
FISH
BRIDGE
(Blank label of softkey is not used)
Plotter Display
Day Twilight
Black Green
Green Green
Multi Yellow
White Blue
Light-orange* Orange*
359.9°M TRIP NU
BRILL
19.9 kt 99.9 nm
CONTST
PANEL
B
BRILL
HUE
C
RADAR
D
STBY
RETURN
E
1-5