Setting Data 4 To Data Output; Data 4 I/O Setup Menu - Furuno GP-80 Installation Manual

Setting DATA 4 to Data Output

1) Press [MENU] [9] and [5]. The DATA 4 I/O SETUP menu appears.
! "
2) Press or to select Level.
# $
3) Press or to select level of external equipment; RS232C or RS422.
4) Press the [ENT] key.
# $
5) Press or to select Out.
"
6) Press to select to Next Page. The DATA 4 I/O SETUP menu appears.
7) Follow "DATA 1 output setting" from step 2.
DATA 4 I/O SETUP
DATA 4. Level RS232C
Data Out
To Next Page
: Select
ENT : Enter MENU : Escape
Appears only when external
DGPS receiver is used.
Figure 5-3 DATA 4 I/O SETUP menu
DATA 4 I/O SETUP
To Previous Page
Data Fmt. V1.5
Talker ID GP
Output Data (00-90 sec)
1. AAM:00 APA:00
2. BWC:00 BWW:00 GGA:01 GLL:00
3. RMB:01 RMC:01 VTG:01
4. WNC:00 WPL:00 XTE:00
5. GNS:00 ZTG:00
ENT : Enter
MENU : Escape
Figure 5-4 DATA 4 I/O SETUP menu
1/2
RS422
Com. DGPS
<Out> 2/2
V2.0 IEC
LC DE
84%
APB:01 BOD:00
WCV:00
ZDA:01
Rnn:00 RTE:00
5. INITIAL SETTINGS
15