Rra; Rohs; Other Approvals - Siemens SIMATIC NET RUGGEDCOM RSG907R Installation Manual

Rugged ethernet switches
Hide thumbs Also See for SIMATIC NET RUGGEDCOM RSG907R:
Table of Contents

Advertisement

6.1.9

RRA

This device has been registered by the Korean Radio Research Agency (RRA) under
Clause 3, Article 58-2 of the Radio Waves Act. As such, the device is marked with a KC
symbol and can be used in the Republic of Korea (South Korea) as a Class A product
in a commercial, industrial or business environment.
A copy of the KC Declaration of Conformity is available from Siemens AG. For contact
information, refer to
Notices specific to the RRA:
Class A Equipment (Industrial Broadcasting and Communication Equipment)
This device complies with the limits of a Class A electromagnetic wave device and
is intended for use outside of a residential environment. The seller or user must be
aware.
6.1.10

RoHS

This device is declared by Siemens AG to meet the requirements of the following
RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
A copy of the Material Declaration is available online at
support.industry.siemens.com/cs/ww/en/view/109738831.
6.1.11

Other Approvals

This device meets the requirements of the following additional standards:
RUGGEDCOM RSG907R
Installation Manual, 02/2021, C79000-G8976-1387-12
IEC/EN/UL 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
R-REM-S14-RSG907R
"Contacting Siemens (Page
WARNING
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
vii)".
https://
Certification
6.1.9 RRA
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ruggedcom rsg907r

Table of Contents