Settings; Setup Mode - FujiFilm 1400 Owner's Manual

R DPOF SET ALL / CANCEL ALL
PLAYBACK MENU
2
A confirmation screen appears. To continue,
press the "MENU/EXE" button.
!
"SET ALL" specifies 1 print for all the images.
!
The "SET FRAME" specifications and cropping
settings are cancelled.
!
Prints can be specified for up to 999 frames on the
same SmartMedia. If you specify more than 999
62
8
frames, the " " warning appears.
3
The total number of prints is displayed on the
LCD monitor and then the menu screen
reappears.
!
"TOTAL" shows the total number of prints specified.
!
If you cancel all the frames, the "TOTAL" display
reverts to "00000".
5

SETUP MODE

Settings

Settings Display Factory default
BACK EXE –––
QUALITY
FINE/NORMAL/BASIC NORMAL
FILE SIZE 1280 960/640 480 1280 960
RENEW/CONT RENEW
FRAME NO.
BEEP HIGH/LOW/OFF HIGH
DATE / TIME EXE –––
e The table below explains the camera setting.
Explanation
Exits set-up.
Sets the compression ratio for recording. Can be set as
described on P.65.
( : FINE ) : NORMAL * : BASIC
Sets the number of pixels recorded (image file size).
Can be set as described on P.65.
Specifies whether the Frame NO. Memory function is
used ( P.66).
Selects the buzzer volume for camera operation. When
this is set to OFF, the camera buzzer emits no sound.
Sets the date and time ( P.17).
See the following page for information on using the settings.
5
63