FujiFilm 1400 Owner's Manual page 17

D n ERASING SINGLE FRAME
1
D
Set the Mode switch to " ".
Press the "MENU/EXE" button to display the
menu screen on the LCD monitor.
!
Press the "CANCEL / BACK" button to exit the menu.
!
See P.46-47 for more information on erasing all the
32
frames on a SmartMedia and formatting SmartMedia.
2
With "FRAME" selected, press the "MENU/EXE"
button.
3
Use the " d " and " c " buttons to display the
image to be erased.
!
To end frame erasing, press the "CANCEL / BACK"
button.
4
Press the "MENU/ EXE" button to erase the
displayed image. When erasing is complete, the
next image appears and the "
message is displayed.
!
To continue erasing images, repeat the procedure
from step 3 .
!
If " " is displayed, the image
protection must be removed to erase the image
( P.48-51).
!
If the " " message is displayed, DPOF is
specified. When you press the "MENU/EXE" button,
the image is erased and the DPOF settings are
updated.
2
"
33