Last signal receive result/auto time
G
adjustment setting status
The second hand points to [Y(YES)] or
[N(NO)] to indicate the result of the last
auto time adjustment operation based on
time signal reception or connection with a
phone.
[Y(YES)]: Auto time adjustment
successful
[N(NO)]: Auto time adjustment failed
The second hand points to [Y(YES)] or
[N(NO)] to indicate if auto time adjustment
is enabled or disabled.
[Y(YES)]: Auto time adjustment enabled
[N(NO)]: Auto time adjustment disabled
Alarm on/off setting
H
In the Alarm Mode, the second hand
indicates if the alarm is enabled or
disabled.
[ON]: Alarm enabled
[OFF]: Alarm disabled
[RC]
I
The second hand points to this mark while
calibration signal reception is in progress.
[C]
J
The second hand points to this mark while
there is a connection between the watch
and a phone.
Watch Operation Guide 5672
Navigating Between Modes
Each press of (C) cycles between watch
modes.
In any mode, hold down (C) for at least one
●
second to return to the Timekeeping Mode.
C
Alarm Mode
C
Connecting with a Paired Phone
●
Hold down (C) for at least 2.5 seconds until the
second hand points to [C].
To disconnect, press any button.
●
Before connection
Pair the watch with a phone.
l
C
Timekeeping Mode
Mode hand
C
Stopwatch Mode
Timer Mode
C
After connection
C
Any button
Mode Overview
Timekeeping Mode
●
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands show
another time (Dual Time).
①
②
Last Time
Adjustment Result
③
④
⑤ ⑥
Day of the week at current location
A
Current location time (24-hour time)
B
One revolution every 24 hours.
Dual Time hour (24-hour hand)
C
The hand points to the A-side for a.m.
times, and to the P-side for p.m. times.
Dual Time hour
D
Dual Time minute
E
Current location date
F
Time Adjustment Using a Time Calibration
Signal
Hold down (D) for at least 0.5 seconds until the
second hand points to [RC].
A manual time calibration signal receive
●
operation cannot be performed while the
watch is paired with a phone.
Swapping the Current Location Time and
Dual Time
Hold down (B) for at least three seconds.
Connecting with a Paired Phone to Adjust
the Watch's Time
Hold down (D) for at least 0.5 seconds until the
second hand points to [C].
Searching for a Paired Phone
Hold down (D) for at least 5 seconds until the
second hand points to [C] twice.
7