Changing The Home City Summer Time Setting; Connection; Connecting With A Phone; Disconnecting From Your Phone - Casio 5672 Operation Manual

Changing the Home City
Summer Time Setting
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
Watch Operation Guide 5672
Important!
If you have problems establishing a
●
connection, it could mean that the
CASIO WATCHES app is not running
on your phone. On your phone's home
screen, tap the "CASIO WATCHES"
icon. After the app starts up, hold down
the watch's (C) button for at least 2.5
seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
CASIO WATCHES: "Watch settings"
"Connection time with the app".
n
Next, select a setting of 3 minutes, 5
minutes, or 10 minutes.

Disconnecting from Your Phone

Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.

Unpairing

Unpairing the watch from a phone requires
both CASIO WATCHES and watch
Disconnected
operations.
Deleting Pairing Information from
●
CASIO WATCHES
1. X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
2. Y
Tap the "CASIO WATCHES" icon.
3. Y
Perform the operation shown on the
phone screen to unpair.
Disconnected
15