Casio 5672 Operation Manual page 29

Watch Operation Guide 5672
Q3
Signal reception should have been
successful, but the watch's time and/
or day is wrong.
Is the indicated time off by one hour or by
30 minutes?
The watch may be using the wrong time
offset. Correctly specify the time zone
where you are using the watch.
Selecting Your Home City's Time Zone
l
Is the indicated hour and/or minute wrong?
The hour hand and/or minute hand may
be out of alignment. Perform the
procedure under "Adjusting Hand and
Day Indicator Alignment" to auto adjust
hour and minute hand alignment.
Adjusting Hand and Day Indicator
l
Alignment
Is the indicated day of the week wrong?
The day of the week hand (mode hand)
may be out of alignment. Perform the
procedure under "Adjusting Hand and
Day Indicator Alignment" to adjust mode
hand alignment.
Adjusting Hand and Day Indicator
l
Alignment
Is the indicated Dual Time and/or alarm
time wrong?
The Dual Time and/or alarm time hands
(small hour hand, small minute hand) may
be out of alignment. Perform the
procedure under "Adjusting Hand and
Day Indicator Alignment" to adjust small
hour hand and small minute hand
alignment.
Adjusting Hand and Day Indicator
l
Alignment
After checking the above, the time and/or
day settings is still wrong.
Adjust time and day settings manually.
Using Watch Operations to Adjust the
l
Time Setting
I can't pair the watch with a
phone.
Q1
I've never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install CASIO WATCHES on your
phone?
CASIO WATCHES needs to be installed
on your phone in order to connect with the
watch.
Install the required app on your
l A
phone.
Are your phone's Bluetooth settings
configured correctly?
Configure the phone's Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
"Settings" "Bluetooth"
n n
●
"Settings" "Privacy"
n n
●
"CASIO WATCHES"
n n
Android Users
Enable Bluetooth.
●
Other than the above.
Some phones need to have BT Smart
disabled to use CASIO WATCHES. For
details about setting procedures, see your
phone documentation.
On the Home Screen, tap: "Menu"
"Settings" "Bluetooth"
n n
"BT Smart settings" "Disable".
n
I can't reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is CASIO WATCHES running?
The watch cannot re-connect with your
phone unless the CASIO WATCHES app
is running on the phone. On the phone's
Home Screen, tap the "CASIO
WATCHES" icon. Then on the watch, hold
down (D) until the second hand points to
[C] twice.
The second hand will point to [C] once
●
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
Have you tried turning your phone off and
then back on again?
Turn the phone off and back on, and then
tap the "CASIO WATCHES" icon. Next,
on the watch, hold down (D) until the
second hand points to [C] twice.
On
The second hand will point to [C] once
●
"Bluetooth"
after about 0.5 seconds, and then a
On
second time after about 2.5 seconds.
n
"Menu"
n
29