Swapping The Home City Time And Dual Time; Alarm; Using Casio Watches To Configure Alarm Settings; Configuring Alarm Settings - Casio 5672 Operation Manual

Table of Contents

Advertisement

3.
Hold down (B) for at least one second.
Each time you hold down (B) for at least
one second, the summer time setting will
cycle to the next available option.
4.
Push the crown back in and then lock it.
Note
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
Swapping the Home City
Time and Dual Time
In the Timekeeping Mode, you can swap your
Home City time with your Dual Time by holding
down (B) for at least three seconds.
Before swapping
After swapping
Home Time
Dual Time
Home Time
If a swapping operation causes a change in
the day indicator setting, the mode hand will
rotate repeatedly.
Hand and Day Indicator Movement
l
Note
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
Watch Operation Guide 5672
The watch will beep when the alarm time is
reached.
The beeper is muted in the cases described
below.
When battery power is low
ー 
When watch is at Level 2 power saving
ー 
Power Saving
l
Using CASIO WATCHES to
Configure Alarm Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set alarms.
Configuring Watch Settings
l
Dual Time

Alarm

Configuring Alarm Settings

1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Loosen the crown and then pull it out to the
first click.
This turns on the alarm.
3.
Rotate the crown to change the alarm time
setting.
Alarm on
Hour
Minute
4.
Push the crown back in and then lock it.
Note
The watch will automatically return
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
To stop the alarm
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
Crown
22

Advertisement

Table of Contents
loading

Table of Contents