Configuring The Summer Time Setting; Time); Swapping The Home City Time And World Time; (Dual Time) - Casio 5636 Operation Manual

3.
Rotate the crown to change the time zone.
The Dual Time hour and minute hands
indicate the current time in the selected
time zone.
Dual Time hour and minute
Dual Time 24-hour
4.
Push the crown back in and then lock it.
Configuring the Summer
Time Setting (Dual Time)
The watch's current time setting can be
change to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
Important!
If the Dual Time zone is one area where
●
time calibration signal reception is
possible, you can select [AT] (Auto) for
the summer time setting. While [AT] is
specified as the summer time setting,
the first time calibration signal receive
operation before or after the summer
time period is entered will cause the
Dual Time setting to switch
automatically between summer time
and standard time.
For information about areas where
time calibration signals can be
received, go to the section below.
City (Time Zone) List
l
Watch Operation Guide 5636
1.
Enter the Calendar Mode.
Navigating Between Modes
l
2.
Loosen the crown and then pull it out to the
first click.
The second hand will point to the currently
selected time zone.
The mode hand will point to the summer
●
time setting of the Dual Time.
3.
Hold down (B) for at least one second.
Crown
Each time you hold down (B) for at least
one second, the summer time setting will
cycle to the next available option.
4.
Push the crown back in and then lock it.
Note
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
Swapping the Home City
Time and World Time (Dual

Time)

In the Calendar Mode, you can swap your
Home City time with your Dual Time by holding
down (B) for at least three seconds.
Before swapping
Home Time
Dual Time
If a swapping operation causes a change in
●
the day indicator setting, the mode hand will
rotate repeatedly.
Hand and Day Indicator Movement
l
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
International Travel
l
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).

Measuring Elapsed Time

1.
Enter the Stopwatch Mode.
l
2.
Use the operations below to measure
elapsed time.
After swapping
Dual Time
3.
Press (A) to reset the elapsed time to all
zeros.
Home Time

Stopwatch

Seconds
Hours Hours (24-hour time)
Minutes
Navigating Between Modes
Start
Stop
Resume
Stop
15