Samsung SP-LSP9TGA E-Manual page 87

Changing the current time
Settings General
Time Offset adjusts the time through a network connection.
This function is available only when
normal broadcast signals, and the Projector is connected to the Internet through a local area network.
Setting the clock manually
Settings General
When Clock Mode is set to Manual, you can directly enter the current date and time. Select the
using the directional buttons on the remote control.
Using the sleep timer
Settings General
You can use this function to automatically shut off the Projector after a pre-set period of time. You can set the sleep
timer for up to 180 minutes after which it will turn off the Projector.
This function may not be supported in some viewing modes.
This function may not be supported depending on the model or geographical area.
Turning off the Projector using the off timer
Settings General
You can set Off Timer to shut off the Projector automatically at a specific time.
Clock has been set.
To use this function, first set the
This function may not be supported in some viewing modes.
System Manager
Clock Mode is set to Auto, the Projector fails to receive time information through
System Manager
System Manager
System Manager
Clock ( Settings
- 87 -
Time Clock Time Offset
Time Clock Clock Mode
Time Sleep Timer
Time Off Timer
Off Timer
General System Manager
Manual
Date and Time
is only available if the
Time Clock).
by