Samsung SP-LSP9TGA E-Manual page 41

Connecting a Remote PC
Provides Remote Desktop Connection (RDP) for remotely connecting to a PC running on Windows and Virtual
Network Computing (VNC) for a PC running on Mac. To remotely connect to a PC, you must enter the IP address of
the remote PC or select a saved profile. Enter a correct user name and password and select a correct protocol. If
there is any computer that can be accessed via the same network, the found IP and protocol are displayed.
To register a frequently used PC, move the focus to
up window appears, select Add, and then enter the PC information.
To use this function, you must select Allow remote connections to this computer in advance on the Windows PC you want
the Projector to connect to.
When your PC enters in power saving mode, connection is not available. It is recommended to cancel the power saving
mode.
• Windows OS:
1. Right-click the My Computer icon on Desktop or Windows Explorer and then click Properties.
2. Click Advanced System Settings. The System Properties window appears.
3. Click the Remote tab and then select the Allow Remote Assistance connections to this computer.
• Mac OS:
1. Select Menu
2. Select the Screen Sharing check box.
3. Run the resolution changing app downloaded from App Store and then change the resolution to 1440 x 900
or lower.
If you do not change the resolution in Mac OS, the previous image may appear while connecting a remote computer.
Remote connection to a PC running on Windows via the RDP protocol is only supported for Windows 7 or later. And the
operating system must be a Professional or higher edition.
Remote connection to a PC running on Mac via the VNC protocol is only supported for Mac OS X 10.5 or later.
It is recommended to connect the wired network because the screen or sound may be interrupted depending on the
network condition.
System Preferences and then click Sharing.
Manage User Profiles, and then press the Select button. When a pop-
- 41 -