Table of Contents
Advertisement
The problem
The Projector audio is not being
played through the AV receiver.
The sound is not heard clearly.
The volume of the external device
cannot be adjusted.
I want to turn off and on the
Projector and audio device at the
same time.
Check the A/V receiver's power supply and its settings.
•
When connecting the optical cable between the Projector and A/V receiver, make
sure that the sound output is set
•
In case of HDMI-eARC connection, make sure that it is connected to the eARC
dedicated HDMI port on your Projector. However, the eARC can be used only when
the A/V receiver supports the eARC feature.
HDMI (ARC) is supported by some models. Check the HDMI port name of the
purchased product's model.
Change to an appropriate sound mode.
•
Settings
This function may not be supported depending on the model.
Check the cable connection between the Projector and the external device.
When connecting an external speaker such as home theatre via HDMI, make sure it is
connected to the HDMI (eARC) port on the Projector. Make sure that the
Settings
General
External Device Manager
your Projector.
HDMI (ARC) is supported by some models. Check the HDMI port name of the
purchased product's model.
When you connect the Samsung Soundbar to the Projector via Bluetooth, the power
turns off and on together. It may not be supported depending on the Samsung
Soundbar model.
When you connect an audio device that supports HDMI eARC to the HDMI (eARC) port
on the Projector, the power turns off and on together.
HDMI (ARC) is supported by some models. Check the HDMI port name of the
purchased product's model.
- 128 -
Try this!
Optical
on your Projector.
Sound
Sound Mode
Anynet+ (HDMI-CEC)
is active on
Advertisement
Table of Contents
