Setting The Viewing Environment For External Devices - Samsung SP-LSP9TGA E-Manual

Setting the Viewing Environment for External Devices

You can optimise the Projector for viewing specific video formats.
Playing games on an optimised screen
Settings General
You can enable game mode to optimise the Projector's settings for playing video games with a gaming console,
such as a PlayStation™, Xbox™ or Nintendo Switch™.
This function may not be supported depending on the model or geographical area.
The game mode is not available for normal Projector viewing.
The screen may shake somewhat.
When Game Mode is enabled,
automatically switched depending on the selected audio device on the
When Game Mode is set to On, some functions are not available.
To use a different external device on the same port, remove the game console connection, set
connect the external device to the port.
The Game Mode functions used for Nintendo Switch™ are subject to change without prior notice.
Using Input Signal Plus
Settings General
Expands the input signal range for HDMI connections.
When you select the HDMI connector you want to use for
Input Signal Plus function to On, the Projector screen may flicker.
When you connect the Projector to an external device that supports only the UHD 24 Hz or UHD 30 Hz frequency or any FHD
frequency, the Input Signal Plus
For more information about the supported UHD resolutions, refer to "Supported Resolutions for UHD Input Signals".
Using HDMI black level
Settings General
Use HDMI Black Level to adjust the black level to compensate for low black levels, low contrast or dull colours
generated by external devices connected to the Projector via an HDMI cable.
This function is only available when the input signal connected to the Projector via an HDMI connector is set to RGB444.
External Device Manager
Picture Mode and Sound Mode
External Device Manager
function may not be available. In this case, turn off the
External Device Manager
Game Mode
are switched to Game
Sound Output
Input Signal Plus
Input Signal Plus, and then press the Select button to set the
HDMI Black Level
- 80 -
automatically. Sound Mode
menu.
Game Mode to Off, and then
Try Now
Input Signal Plus function.
Try Now
may not be