Table of Contents
Advertisement
EcoDesign Disclosures
1.1 EcoDesign Overview
The intent of EU's ecodesign requirements is to ensure that energy-related products operate efficiently
and are able to be disassembled for repair, upgrade, or recycling, in order to limit their potential impact on
the general energy supply and the enviroment. Servers and data storage devices have been identified as
significant products in this regard.
In compliance with ecodesign requirements, this document provides information about the OpenFlex
F3x00 and E3000 related to its manufacturing and operation, and instructions for secure data deletion and
disassembly.
1.2 OpenFlex F3x00 and E3000 EcoDesign Specifications
Manufacturer's Registered Trade Name
Manufacturer's Registered Trade Address
Starting Year of Manufacture
PSU efficiency at 20%, 50%, 100%
Power Factor at 50% Rated Load Level
Declared Operating Condition Class
Neodymium Content in HDDs
1.3 Secure Erase and Sanitize
For the OpenFlex F3x00 and E3000 , initializing and sanitizing a device can be accomplished from the same
page in the OCGUI. These features provide the option to securely erase the mapping table and erase all
of the blocks that have been written to the devices. The Secure Erase and Sanitize features may also be
executed from the API.
1.3.1 Completing Secure Erase on a Device Using the OCGUI
* This value is the original date of product manufacture. For the specific manufacture date of your platform, check the
agency label attached to the platform. There will be a 4 digit date code on that label.
Product Type
Manufacturer's Name
Product Model Number
of rated output power
Cobalt Content in Batteries
1. EU EcoDesign Compliance
1.1 EcoDesign Overview
Online Data Storage Product
Western Digital
Western Digital®
5601 Great Oaks Parkway
San Jose, CA 95119
USA
Chassis: OpenFlex™ E3000
Storage Device: OpenFlex™ F3x00
2019
*
20% load = 93%
50% load = 94%
100% load = 91%
Minimum Power Factor (at 50%) = 0.98
A2
N/A
N/A
2
Advertisement
Table of Contents
