Advertisement
Safety Precautions
This installation manual describes how to install the PIM. For installation of other
optional accessories, refer to the appropriate installation manual.
2
E-
MIM-B16_PIM_IM_E 32320-1.indd
R ead carefully this installation manual before
WARNING
installation and check if the PIM is installed correctly
after installation.
Do not attempt to install or repair this PIM by yourself.
T his PIM contains no user-serviceable parts.
Always consult authorized service personnel for repairs.
W hen moving, consult authorized service personnel for
disconnection and installation of the PIM.
E nsure that the wall is strong enough to support the
weight of the PIM.
M ust install the PIM with rated power supply.
T he PIM must be installed according to
the national electrical rules by an installation specialist.
I f you wish to uninstall the PIM, consult an authorized
installation center.
Do not use inflammable gases near the PIM.
CAUTION
D o not install the PIM in a location where
it will come into contact with combustible gases,
machine oil, sulphide gas, etc.
A void locations where acid/alkali solution or special
spray is used.
C hoose a location that is dry and sunny, but not exposed
to direct sunlight. Suitable temperature is between
0°C(32°F) and 39°C(102.2°F).
Do not spill water into the PIM.
D o not apply tensile strength to the cable to avoid cable
damage.
D o not press the buttons with a sharp object.
D o not connect the power cable to the control terminal.
I f the PIM is installed in a hospital or other special places,
it should not affect other electronic devices.
2
2010-05-20
ｿﾀﾈﾄ 7:18:42
Advertisement
