Mercedes-Benz A Series 2015 Owner's Manual page 373

Changing a wheel
370
do not open or close a door or the tailgate
R
while the vehicle is raised.
make sure that no persons are present in
R
the vehicle when the vehicle is raised.
Vehicles with steel wheels: the hub cap
covers the wheel bolts. Before you can
unscrew the wheel bolts, you must remove
the hub cap.
Using both hands, carefully reach into two
X
wheel trim openings and remove the wheel
trim.
Vehicles with hub caps: the hub cap covers
the wheel bolts. Before you can unscrew the
wheel bolts, you must remove the hub cap.
To remove: turn the centre cover of hub
X
cap : anti-clockwise and remove.
To fit: before fitting, ensure that hub cap :
X
is in the open position. To do this, turn the
centre cover anti-clockwise.
Position hub cap : and turn the centre
X
cover clockwise until hub cap : engages
physically and audibly.
Make sure that hub cap : is fitted
X
securely.
Using wheel wrench ;, loosen the bolts on
X
the wheel you wish to change by about one
full turn. Do not unscrew the bolts com-
pletely.
Jacking points
The jacking points are located just behind the
front wheel arches and just in front of the rear
wheel arches (arrows).
Mercedes-AMG vehicles and vehicles
with AMG equipment: to protect the vehicle
body, the vehicle has covers fitted next to the
jacking points on the outer sills.