Mercedes-Benz A Series 2015 Owner's Manual page 130

Replacing the front bulbs
Fitting/removing the cover on the front
wheel arch
You must remove the cover of the front wheel
housing before you can change the front turn
signal lamp.
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Turn rotary knob : through 90°.
X
Cover ; is released.
Push cover ; down.
X
To fit: push cover ; up.
X
Turn rotary knob : through 90°.
X
Cover ; is locked.
Dipped-beam headlamps (halogen
lamps)
Remove the cover in the front wheel arch
X
( page 127).
Y
Turn housing cover : anti-clockwise and
X
remove it.
Turn bulb holder ; anticlockwise and pull
X
out.
Pull the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it to the
X
right.
Replace the cover in the front wheel arch
X
( page 127).
Y
Main-beam headlamps and side lamps/
parking lamps (vehicles with halogen
headlamps)
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover : anticlockwise and
X
remove it.
Turn bulb ; anti-clockwise and remove it.
X
Insert the new bulb and engage it to the
X
stop.
Press on housing cover : and turn it to the
X
right.
Replacing bulbs
Z
127