Mercedes-Benz A Series 2015 Owner's Manual page 118

if electrolyte is swallowed, immediately
R
rinse out your mouth thoroughly. Do not
induce vomiting.
if electrolyte comes into contact with skin
R
or eyes or is swallowed, seek medical atten-
tion immediately.
immediately change out of clothing that has
R
been in contact with electrolyte.
if an allergic reaction occurs, seek medical
R
attention immediately.
The "Automatic anti-dazzle mirrors" function
is only available if the vehicle is equipped with
the "Mirror package".
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
dazzle mode if:
the ignition is switched on and
R
incident light from headlamps strikes the
R
sensor in the rear-view mirror
The mirrors do not go into anti-dazzle mode if
reverse gear is engaged or if the interior light-
ing is switched on.
Parking position of the exterior mirror
on the front-passenger side
General notes
The "Parking position for the exterior mirror
on the front-passenger side" function is only
available if the vehicle is equipped with the
"Memory package".
Setting and storing the parking position
You can set the front-passenger side exterior
mirror so that you can see the rear wheel on
that side as soon as you engage reverse gear.
You can store this position.
Using reverse gear
Button for the exterior mirror on the driv-
:
er's side
Button for the exterior mirror on the front-
;
passenger side
Adjustment button
=
Memory button M
?
Make sure that the vehicle is stationary.
X
Turn the key to position 2 in the ignition
X
lock ( page 157).
Y
Press button ; for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the
X
exterior mirror. You should see the rear
wheel and the kerb in the exterior mirror.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving posi-
tion.
Using the memory button
You can set the front-passenger side exterior
mirror so that you can see the rear wheel on
that side as soon as you engage reverse gear.
This setting can be stored using memory but-
ton M ?.
Make sure that the vehicle is stationary.
X
Turn the key to position 2 in the ignition
X
lock ( page 157).
Y
Mirrors
115
Z