Table of Contents
Advertisement
DCS-2500T
Trouble
Running time is too short
Chain oil does not come out
Unit vibrates excessively
Checking and maintenance requires specialist knowledge. If you are
unable to check and maintain the product or deal with a fault yourself,
consult your dealer. Do not attempt to dismantle the product. Consult your
dealer in the event of a problem that is not covered in the table above, or
other such concerns. For spare parts and consumables, please use only
genuine parts and designated products and components. Using parts from
other manufacturers or non-designated components may result in a
malfunction.
X7508220200
© 10/21 ECHO Incorporated
TROUBLESHOOTING
Cause
Battery outside
acceptable
temperature range
Unit electronics too hot
Battery discharged
Cutting attachment
dirty
Chain tension too hight Readjust chain tension
No oil in the oil tank
Clogged chain oil pipe
or oil filter
Fault in the oil passage Consult your dealer
Fault in internal parts
Solution
Remove the battery and
allow to cool
Turn unit off and allow to
cool
Charge the battery
Clean the cutting
attachment
Fill the chain oil
Clean the chain oil pipe
and oil filter
Consult your dealer
57
Advertisement
Table of Contents
