Table of Contents
Advertisement
OPERATION
If the power button does not stop the chain saw, remove
◆
the battery to stop the power supply to chain saw. Have
your authorized servicing dealer repair power button
before using chain saw again.
If the saw chain does not stop when the trigger switch and
◆
trigger switch lockout are released, remove the battery to
stop the power supply to chain saw. Have your authorized
servicing dealer repair unit before using again.
Before Use
Checking Chain Tension
Remove battery from unit when checking chain tension.
Always loosen sprocket cover nut before turning the chain tension
adjuster, otherwise damage can occur to the sprocket cover and
tensioner.
1.
Chain tension should be checked
frequently during work and
adjusted if necessary.
2.
Tension the chain as tight as
possible, but so that it can still be
pulled easily along the guide bar by
hand.
Chain Lubrication Test
Hold the chain just above a dry
surface and open the throttle to
half speed for 30 seconds.
A thin line of "thrown" oil should be
seen on the dry surface.
36
DCS-2500T
X7508220200
© 10/21 ECHO Incorporated
Advertisement
Table of Contents
