Echo DCS-2500T Operator's Manual page 23

DCS-2500T
Accidents can occur if the product starts unexpectedly.
Do not touch high temperature or high voltage components
while the product is running.
Do not touch the following high temperature or high voltage components
while the product is running or for some time after it stops.
• High temperature components. You could burn yourself if
you touch a high temperature component.
• High voltage components. You could receive an electric
shock if you touch a high voltage component while the
product is running.
Turn off the unit when checking or maintaining the
product.
Observe the following precautions when checking and maintaining your
product after use:
Turn the unit off and do not attempt to check or maintain the product until
unit has cooled. You could burn yourself on a hot unit.
Turn off the unit immediately if anything goes wrong.
In the following situations, turn off the unit immediately and ensure that the
cutting device has stopped before checking each area of the product.
Replace any damaged parts.
• If the cutting device hits a rock, tree, post, or other such obstruction while
you work.
• If the product suddenly starts to vibrate abnormally. Continuing to use
parts when they are damaged could lead to an accident or serious injury.
A ten meter radius is a danger zone.
The area within a 10 m (33 ft.) radius of the product is a danger zone. Be
careful to observe the following precautions while working with the
product.
• If another person enters the danger zone, turn off the unit.
• Do not allow anyone to hold the material you are cutting. Any contact with
the saw chain could cause serious injury.
X7508220200
© 10/21 ECHO Incorporated
SAFETY
23