How To Laminate; Need Help; Worldwide Warranty; Product Registration - Fellowes NEPTUNE 125 Instructions Manual

HOW TO LAMINATE

4.
Switch the power on.
5.
Turn the machine 'On' using the 'standby' button.
6.
The default setting is 3 Mil. thickness, if laminating dif-
ferent thickness pouches choose between 4, 5 or 7 Mil.
pouch thickness as required. The selected button will
flash red during warm-up or cool-down periods.
7.
When the selected temperature is reached, the flashing
light will change from flashing red to solid green color
and a signal will sound.
8.
Place the document into the open pouch. Ensure the
document is centered against the sealed edge. Use the
appropriate pouch size for the document.

NEED HELP?

Let our experts help you with a solution. You'll find the numbers
for your nearest service center on the back cover of this manual.
Customer Service:

WORLDWIDE WARRANTY

Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of purchase
by the original consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy will be repair
or replacement, at Fellowes' option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling
or unauthorized repair. Any implied warranty, including that of merchantability or fitness for particular purpose, is hereby limited in
duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for any consequential or incidental
damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from this
warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or
conditions may be required by local law. For more details or to obtain services under this warranty, please contact Fellowes or your
dealer.

PRODUCT REGISTRATION

Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from product
news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside of the
machine.
6
403843_2_NA_Neptune_EFS_v6.2.indd 6
www.fellowes.com
9.
Ensure the pouch enters the machine sealed edge first.
Keep the pouch straight and centered within the slot,
not on an angle. Use the entry markings as a guide.
10.
Upon exit, the laminated pouch is hot and soft. To
prevent jamming remove the pouch immediately. Place
pouch on to a flat surface to cool.
11.
To eject a pouch, press and hold down the reverse
button until the pouch is ejected from the front of the
machine. The Standby button will flash and the alert
will sound.
12/08/2009 16:21:21