Table of Contents
Advertisement
Introduction
Introduction, cont'd
About the TP Receivers
The TP R BNC A, TP R BNC AV and TP R 15HD are Extron
Twisted Pair (TP) receivers that receive transmissions of RGB
video, component video, S-video, composite video, and stereo
audio over Extron Enhanced Skew-Free™ A/V UTP cable or
standard Category (CAT) 5 unshielded twisted pair (UTP),
shielded twisted pair (STP), or foil shielded twisted pair
(FTP) cable. Standard transmission distance is shown in the
tables below. Minimum reliable transmission distance for the
TP R BNC A and TP R BNC AV is 50 feet. The TP R 15HD A
provides reliable reception and high quality video output
without minimum distance limitations.
Maximum distance is determined by the output frequency
and resolution. The following table specifies recommended
maximum transmission distances using Extron Enhanced
Skew-Free A/V UTP cable or UTP CAT 5 cable, terminated with
CAT 6, or at least CAT 5e, rated connectors.
N
Recommended transmission ranges at 60 Hz,
TP R 15HD A
Recommended transmission ranges at 60 Hz,
TP R BNC A and TP R BNC AV
N
TP Receivers • Introduction
1-2
Extron recommends using the highest quality
pre‑terminated and tested cable. Cables terminated on
site should be tested to ensure compliance with Category
5e specifications.
Video format
Composite video and audio
Component video and S-video
640 x 480
800 x 600
1024 x 768
1280 x 1024
1600 x 1200
Video format
Composite video and audio
Component video and S-video
640 x 480
800 x 600
1024 x 768
1280 x 1024
1600 x 1200
While it is possible to exceed recommended distances,
image quality may be reduced.
Maximum range
800 feet
800 feet
500 feet
400 feet
300 feet
200 feet
150 feet
Maximum range
1000 feet
1000 feet
1000 feet
800 feet
600 feet
400 feet
300 feet
Advertisement
Table of Contents
