Front Panel Controls And Indicators - Extron electronics TP Receivers User Manual

Front Panel Controls and Indicators

The TP R BNC A and TP R BNC AV have similar controls and
indicators (figure 2-12). The TP R 15HD A has a reduced set of
controls (figure 2-13).
1
1
Figure 2-12 — TP R BNC A and TP R BNC AV
a
Power LED
N
N
1
Figure 2-13 — TP R 15HD A
Amber — indicates that power is applied, but the
transmitter is not connected to a receiver.
On the TP R BNC AV if the composite video TP link is used
and the RGB link is not used, this LED will only light amber.
This LED will only light amber if the transmitter is a VTT001.
Green — indicates that a transmitter is connected and any
of the following grounding conditions exist:
• The transmitter is powered by a local power supply
and the receiver output is connected to a device
that provides a reference ground.
• The transmitter is powered by the receiver, is locally
grounded, and the receiver output is connected to a
device that provides a reference ground.
TP Receivers • Installation and Operation
2 3 4
RGB
MANUAL
LEVEL PEAKING
AUTO
2 3 4
VIDEO
MANUAL
LEVEL PEAKING
AUTO
RGB
MANUAL
LEVEL PEAKING
AUTO
4 5
RGB
LEVEL PEAKING
TP R 15HD A
5
TP R BNC A
5
TP R BNC AV
2-19