Installation and Operation, cont'd
Smooth
A
Figure 2-9 — Power connector wiring
Termination of TP cable
Figure 2-10 details the termination of TP cables in accordance
with the TIA/EIA T 568A wiring standards.
Side
Clip Down
1 2 3 4 5 6 7 8
1
1&2
3&6 4&5
Figure 2-10 — TP cable termination
TP Receivers • Installation and Operation
2-16
TP R BNC A — Wire the external 15 V power supply into
this 3-pole captive screw connector (figure 2-9) and
plug the connector into the receiver. The power
supply is included with the unit.
Ridges
A
Power Supply
Output Cord
TP R 15HD A — Wire the external 15 V power supply
into this 2-pole captive screw connector (figure 2-9)
and plug the connector into the receiver. The power
supply is included with the unit.
RJ-45
connector
Pin
Wire color
1 White-green
2 Green
3 White-orange Audio &
4 Blue
2 3 4 5 6 7 8
5 White-blue
6 Orange
7 White-brown
8 Brown
7&8
TP R 15HD A
SECTION A–A
RGB video and audio
Signal
Red/V. sync+
Red/V. sync-
power
Green+
Green-
Audio &
power
Blue/H. sync+
Blue/H. sync-
* Audio can be jumpered to wire pair 7 and 8.
See Audio jumpers
Twisted
Pairs
TP R BNC A
(5 mm)
3/16"
Max.
AV Video and audio
Level
Signal
Video+
±0.35 V
+0.35 V
Video-
±0.35 V
Audio+* &
+15 V with
+15 V
power+
±0.5 V
Reserved None
+0.35 V
Reserved None
-0.35 V
Audio-* &
±0.5 V
0 V
power-
Reserved None
±0.35 V
Reserved None
±0.35 V
in this chapter.
Level
-0.35 V