Projector Mounting - Extron electronics TP Receivers User Manual

7. For under-surface mounting, align the mounting screws
with the slots in the brackets and place the receiver against
the surface, with the screws through the bracket slots.
For under-surface mounting, slide the receiver slightly
8.
forward or back, then tighten all four screws to secure the
switcher in place.

Projector mounting

All of the receiver models can be mounted on a projector
bracket using the appropriate optional mounting bracket, the
Extron Pole Mount Kit for One 1/4 Rack Width Product (part
#70-217-01) (TP R 15 HD A) or Pole Mount Kit for One 1/4 or
1/2 Rack Width Product (part #70-077-04) (all other models).
Secure the mounting bracket to the receiver using two machine
screws in the side of the receiver (TP R 15HD A) or the three
#8 machine screws provided (all other models). Secure the
receiver to a projector mount or other surface by inserting the
mounting bolt through the bracket's slotted hole (figure 2-6).
Figure 2-6 — Projector bracket mounting a receiver
TP Receivers • Installation and Operation
Projector
Mounting
Bracket
Mounting
Bolt
TP R 15HD A
2-11