Computer Port Options
Use this procedure to specify the interface parameters used when sending
results to a host computer or Laboratory Information System (LIS).
1. Select
2. Use the cycle keys to set the first 3 options.
Key
Port
Baud
Data, Parity
The port must be set to either computer port, ethernet port, or both, to
transfer results to a computer.
You can also set the computer port through the first Setup menu. If the port
selection changes in 1 menu, it automatically changes in the other menu.
Refer to the specifications accompanying the computer for information on
the required parameters for Baud, Data, and Parity.
n
i o
3. Select
t
r a
u
i g
f
n
o
C
m
t e
s
y
S
104
Computer port options
.
Output format
.
Options
Off
Computer Port
Ethernet Port
Both
1200
2400
4800
9600
19200
8/None
7/Even
7/Odd
7/None
Clinitek Advantus Operator's Guide