Printing and Transmitting Results
Printing Records from Memory
1. Recall a group of results. Refer to Recalling Results‚ page 27.
2. Select
3. Select 1 of the following options:
To...
Print the record displayed,
m
t e
s
y
Specify the beginning and
S
ending records to print,
e
h
t
g
i n
t
r a
e
p
O
Print all records that were
recalled,
After printing is complete, the screen returns to the earliest record of the
group. If Print a group of results is selected, the display first returns to the
screen from which the group was selected.
4. Select
Resending Records from Memory
Use this procedure to resend 1 or more records to a host computer or LIS:
1. Recall a group of results. Refer to Recalling Results‚ page 27.
2. Select
28
to print 1 or more records.
Print
Select...
Print only this result
The SEQ # and ID of that record continues to
display on the print option menu.
Print a group of results
1. Use the movement keys to specify the start
2. Select
3. Select
All records in the sequential group print.
NOTE:
include STAT tests carried out during the loadlist
testing.
Print all patient (control) results
as needed to return to the first record.
Previous Screen
.
Resend
record to print.
to select the end record to print.
Enter
This record must have a SEQ # that is higher
than or the same as the start record.
to begin printing.
Enter
The results tested using a loadlist may
Clinitek Advantus Operator's Guide