Server Package Contents; Server Form Factor; Features - Lenovo ThinkSystem ST50 V2 Setup Manual

Quick response code
The system service label, which is on the inside of the server cover, provides a quick response (QR) code for
mobile access to service information. Scan the QR code with a mobile device and a QR code reader
application to get quick access to the Lenovo Service web site for this server. The Lenovo Service web site
provides additional information for parts installation and replacement videos, and error codes for server
support.
The following illustration shows the QR code.
Figure 2. QR code

Server package contents

When you receive your server, verify that the shipment contains everything that you expected to receive.
The server package includes the following items:
Note: Items marked with asterisk (*) are available on some models only.
1. Server
*
2. Keyboard
3. Material box, including items such as accessory kit, power cords

Server form factor

The ThinkSystem ST50 V2 server is designed to support both tower and rack form factors.
You can change the server from tower form factor to rack form factor by installing the tower-to-rack
conversion kit. For instructions on how to install the tower-to-rack conversion kit, refer to the documentation
that comes with the conversion kit.

Features

Performance, ease of use, reliability, and expansion capabilities were key considerations in the design of the
server. These design features make it possible for you to customize the system hardware to meet your needs
today and provide flexible expansion capabilities for the future.
Your server implements the following features and technologies:
• UEFI-compliant server firmware
ThinkSystem ST50 V2 Setup Guide
2
*
and documentation.