System Voltages; Cpu Core; Cpu Fsb - EVGA nForce 123-YW-E175 User Manual

EVGA
w Command Per Clock: This is the command timing setting on a per clock unit basis (options
w tRRD: RAS#-to-RAS# delay of different banks (options are 1 through 15).
w tRC: RAS#-to-RAS# or auto refresh time of the same bank (options are 1 through 31).
w tWR: The Write recovery time (options are 2 through 7).
w tWTR: This is the minimum write-to-read delay with the same chip selected (options are 1
through 10).
w tREF: This is the DRAM refresh rate (options are Auto, 7.8uS, and 3.9uS).
ECC Control
Disabled

System Voltages

Select System Voltages from the Frequency/Voltage Control menu and press Enter to display
the System Voltages menu.

CPU Core

Use the Page Up and Page Down keys to scroll through the voltages or select [Auto] to
automatically set the voltage level for the CPU Core.

CPU FSB

Use the Page Up and Page Down keys to scroll through the voltages or select [Auto] to
automatically set the voltage level for the CPU FSB.
Memory
This function defines the voltage level for the DRAM. Use the Page Up and Page Down keys to
select a voltage or select [Auto] to automatically set the voltage.
are 1T and 2T).
Phoenix – AwardBIOS CMOS Setup Utility
Parameters
CPU Core
CPU FSB
Memory
nForce SPP
NF200 Voltage Level
GTLVREF Lane 0
GTLVREF Lane 1
GTLVREF Lane 2
GTLVREF Lane 3
Users should exercise caution when over-voltaging,
,as it can cause system instability or even void
warranties and damage components.
:Move Enter:Select
System Voltages
Settings Current Value
[Auto] 1.28
[Auto] 1.20V
[Auto] 1.900V
[Auto] 1.30V
[Auto] 1.20V
[Auto] +00mv
[Auto] +00mv
[Auto] +00mv
[Auto] +00mv
+/-/PU/PD:Value F10:Save
F5: Previous Values F7:Defaults
Item Help
Main Level
Voltage level for CPU
Core (CPU VID)
ESC:Exit F1:General Help