Power Management Setup Menu; Acpi Function; Acpi Suspend Type; Power Management - EVGA nForce 123-YW-E175 User Manual

EVGA
Power Management Setup
Select Power Management Setup from the CMOS Setup Utility menu and press Enter to display
the Power Management Setup menu.

ACPI Function

This function on the Power Management Setup menu allows you to enable or disable the ACPI
function.

ACPI Suspend Type

This function on the Power Management Setup menu allows you to select an ACPI Suspend
Type. Types to select from are [S1&S3], [S1(POS)], and [S3(STR)].

Power Management

Use this to select your Power Management selection. The default is User define.
Max. saving: Maximum power savings. Inactivity period is 1 minute in each mode.
Min. saving: Minimum power savings. Inactivity period is 1 hour in each mode.
User define: Allows user to define PM Timers parameters to control power saving mode.

HDD Power Down

Powers down the hard disk drive after a preset period of system inactivity.
The options are Disabled, 1min ~ 15min.

Soft-Off by PBNT

This function on the Power Management Setup menu allows you to set Soft-Off by PBNT to
[Instant-Off] or [Delay 4 Sec].
Phoenix – AwardBIOS CMOS Setup Utility
ACPI function
APCI Suspend Type
Power Management
Video Off Mehtod
HDD Power Down
Soft-Off by PBTN
WOL(PME#) From Soft-Off
WOR(RI#) From Soft-Off
Power-on by Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
HPET Support
POWER ON Function
x KB Power ON Password
x Hot Key Power On
PWRON After PWR-Fail
:Move Enter:Select
Power Management Setup
[Enabled]
[S1&S3]
[User Define]
[DPMS Support]
[Disabled]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Enabled]
[BUTTON ONLY]
Enter
Ctrl-F1
[Former-Sts]
+/-/PU/PD:Value F10:Save
F5: Previous Values F7:Defaults
Item Help
Main Level
ESC:Exit F1:General Help